ZEM locked


Artykuły czasopisma

Zagadnienia Eksploatacji Maszyn


38.107.191.89 | CCBot/1.0 (+http://www.commoncrawl.org/bot.html)

PTT | TRIBOLOGIA



SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 45 NR 1 (161) 2010
on: Wed 14 of Jul, 2010[20:56 UTC]  (23 reads)

SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 45 NR 1 (161) 2010

ZEM v45, nr 1 (161), 2010: ZEM-10-1_Internet.pdf (2.65 Mb), ZEM-10-1_Internet.pdf (2.65 Mb)

CONTENTS: ZEM-10-1_s_001_006.pdf (71.66 Kb), ZEM-10-1_s_001_006.pdf (71.66 Kb)

ZEM v45, nr 1 (161), 2010


Read More (3117 bytes) Print
ZAGADNIENIA EKSPLOATACJI MASZYN V 45 NR 1 (161) 2010
on: Wed 14 of Jul, 2010[20:54 UTC]  (23 reads)

ZAGADNIENIA EKSPLOATACJI MASZYN V 45 NR 1 (161) 2010

ZEM v45, nr 1 (161), 2010: ZEM-10-1_Internet.pdf (2.65 Mb), ZEM-10-1_Internet.pdf (2.65 Mb)

SPIS TREŚCI ZEM-10-1_s_001_006.pdf (71.66 Kb), ZEM-10-1_s_001_006.pdf (71.66 Kb)

ZEM v45, nr 1 (161), 2010


Read More (3184 bytes) Print
Antifriction and antiwear properties of molybdenum sulfides nanosized particles
on: Wed 14 of Jul, 2010[20:53 UTC]  (16 reads)

O.P. PARENAGO*, G.N. KUZMINA* V.D. TEREKHIN*, K.YU. BASHARINA*

Antifriction and antiwear properties of molybdenum sulfides nanosized particles synthesized using nitrogen containing ionic liquids

Key words

Molybdenum compounds, thermolysis, molybdenum sulfides, nanoparticles, solubility, lubricants, antifrictional and antiwear properties.
ZEM v45, nr 1 (161), 2010


Read More (1276 bytes) Print
Experimental study on the rheological behaviour of H46 lubricant oil
on: Wed 14 of Jul, 2010[20:51 UTC]  (20 reads)

RĂDULESCU ALEXANDRU VALENTIN*, RĂDULESCU IRINA**, CRISTESCU CORNELIU***

Experimental study on the rheological behaviour of H46 lubricant oil

Key words

Rheology, lubricant, thermal, experiment.
ZEM v45, nr 1 (161), 2010


Read More (1017 bytes) Print
The lubricant and implants influence above tribological behaviour at three cone
on: Wed 14 of Jul, 2010[20:50 UTC]  (18 reads)

RAZVAN -G. RIPEANU*, IOAN TUDOR*, ION ZIDARU**, ADRIAN -C. DRUMEANU*

The lubricant and implants influence above tribological behaviour at three cone bits bearings

Key words

Three cone bits bearings, friction coefficient, copper implants.
ZEM v45, nr 1 (161), 2010


Read More (1410 bytes) Print
Advanced techniques for nanotribological studies
on: Wed 14 of Jul, 2010[20:49 UTC]  (14 reads)

ZYGMUNT RYMUZA*

Advanced techniques for nanotribological studies

Zaawansowane techniki badań nanotribologicznych

Key words

Nanotribology, nanotribometry, atomic force microscope (AFM), nanoindentation.

Słowa kluczowe

Nanotribologia, nanotribometria, mikroskop sił atomowych (AFM), nanoindentacja.
ZEM v45, nr 1 (161), 2010


Read More (1254 bytes) Print
Nanostructured composite materials on the base of titanium and zirconium with mo
on: Wed 14 of Jul, 2010[20:48 UTC]  (25 reads)

YU.P. SHARKEEV*, V.A. KUKAREKO** E.V. LEGOSTAEVA*, A.V. BYELI***

Nanostructured composite materials on the base of titanium and zirconium with modified surface layers for medicine and engineering

Key words

Titanium, zirconium, modified surface layers.
ZEM v45, nr 1 (161), 2010


Read More (1585 bytes) Print
he effect of clearance variation on the maximum temperature of the oil film of c
on: Wed 14 of Jul, 2010[20:46 UTC]  (14 reads)

S. STRZELECKI*, S.M. GHONEAM**

The effect of clearance variation on the maximum temperature of the oil film of cylindrical 3-lobe journal bearing

Wpływ zmian luzu łożyskowego na maksymalną temperaturę filmu smarowego 3-powierzchniowego cylindrycznego łożyska ślizgowego

Key words

Theory of lubrication, multilobe journal bearings, maximum oil film temperature.

Słowa kluczowe

Teoria smarowania, łożyska ślizgowe wielopowierzchniowe maksymalna temperatura filmu smarowego.
ZEM v45, nr 1 (161), 2010


Read More (2980 bytes) Print
Adhesion influence on the oil velocity and friction forces in conical microbeari
on: Wed 14 of Jul, 2010[20:45 UTC]  (24 reads)

KRZYSZTOF WIERZCHOLSKI*, ANDRZEJ MISZCZAK**

Adhesion influence on the oil velocity and friction forces in conical microbearing gap

Wpływ adhezji na rozkład prędkości oleju i siły tarcia w szczelinie stożkowego łożyska ślizgowego

Key words

Adhesion forces, conical micro-bearings, oil velocity, conical friction forces.

Słowa kluczowe

Siły adhezji, stożkowe mikrołożysko, prędkość oleju, siły tarcia
ZEM v45, nr 1 (161), 2010


Read More (2328 bytes) Print
Adhesion influence on the oil velocity and friction forces in cylindrical microb
on: Wed 14 of Jul, 2010[20:43 UTC]  (22 reads)

KRZYSZTOF WIERZCHOLSKI*, ANDRZEJ MISZCZAK**

Adhesion influence on the oil velocity and friction forces in cylindrical microbearing gap

Wpływ adhezji na rozkład prędkości oleju i siły tarcia w szczelinie walcowego łożyska ślizgowego

Key words

Adhesion forces, cylindrical micro-bearing, oil velocity, friction forces.

Słowa kluczowe

Siły adhezji, walcowe mikro-łożysko, prędkość oleju, siły tarcia.
ZEM v45, nr 1 (161), 2010


Read More (2420 bytes) Print
he influence of vibrating processing on a variation of the chemical composition
on: Wed 14 of Jul, 2010[20:24 UTC]  (28 reads)

N.V. ZAITSEVA*, S.М. ZAKHAROV*, О.А. SHMATKO*, I.L. OBORSKYI**

The influence of vibrating processing on a variation of the chemical composition and properties of electrospark mattings on steel

Key words

Influence, vibrating processing, electrospark mattings, steel, structure, chemical composition, vibro-electric-dynamic, layer-type multi-phase system, meta-sletab, properties.
ZEM v45, nr 1 (161), 2010


Read More (791 bytes) Print
CONTENTS ZEM v44, nr 3 (159), 2009
on: Tue 22 of Jun, 2010[12:25 UTC]  (41 reads)
Read More (2748 bytes) Print
SPIS TREŚCI ZEM v44, nr 3 (159), 2009
on: Tue 22 of Jun, 2010[12:21 UTC]  (42 reads)
Read More (2710 bytes) Print
The influence of tribological characteristics of coated tools on cutting process
on: Tue 22 of Jun, 2010[12:19 UTC]  (54 reads)

BEZJAZYCHNYJ VYACHESLAV FEOKTISTOVICH*, FOMENKO ROMAN NIKOLAEVICH*

The influence of tribological characteristics of coated tools on cutting process and the parameters of surface layer

Wpływ charakterystyk tribologicznych narzędzi z powłokami na proces skrawania i własności warstwy wierzchniej

Key words

The parameters of surface layer, coating, turning, tool, optimal cutting speed.

Słowa kluczowe

Parametry warstwy wierzchniej, powłoka, toczenie, narzędzie, prędkość skrawania.
ZEM v44, nr 3 (159), 2009


Read More (917 bytes) Print
Tribological properties of thixocasted and heat-treated hypoeutectic Al-Si alloy
on: Tue 22 of Jun, 2010[12:15 UTC]  (64 reads)

ALEKSANDAR VENCL*

Tribological properties of thixocasted and heat-treated hypoeutectic Al-Si alloy A356

Key words

Al-Si alloy, thixocasting, dry and lubricated sliding condition, wear, friction.

Własności tribologiczne stopu Al-Si A356 po obróbce cieplnej

Słowa kluczowe

Stop Al-Si, tarcie suche, smarowanie, zużycie, tarcie.
ZEM v44, nr 3 (159), 2009


Read More (1792 bytes) Print
Semi-Markov model of the availability of the means of municipal transport system
on: Tue 22 of Jun, 2010[12:14 UTC]  (41 reads)

KLAUDIUSZ MIGAWA*

Semi-Markov model of the availability of the means of municipal transport system

Keywords

Transport system, municipal transport, semi-Markov model, technological object availability.

Semimarkowski model gotowości środków transportu systemu komunikacji miejskiej

Słowa kluczowe

System transportowy, technicznego. komunikacja miejska, model semi-Markowa, gotowość obiektu
ZEM v44, nr 3 (159), 2009


Read More (4142 bytes) Print
Creation of the servicing information to support the maintenance of a technical
on: Tue 22 of Jun, 2010[12:12 UTC]  (55 reads)

STANISŁAW DUER*

Creation of the servicing information to support the maintenance of a technical object with the use of three-value logic diagnostic information

Key words

Servicing system, expert systems, knowledge base, diagnostic information.

Tworzenie informacji obsługowej wspomagającej obsługiwanie obiektu technicznego wykorzystując trójwartościową informację diagnostyczną

Słowa kluczowe

System obsługiwania, systemy ekspertowe, baza wiedzy, informacja diagnostyczna.
ZEM v44, nr 3 (159), 2009


Read More (2102 bytes) Print
Creation of the servicing information to support the maintenance of a technical
on: Tue 22 of Jun, 2010[12:12 UTC]  (50 reads)

STANISŁAW DUER*

Creation of the servicing information to support the maintenance of a technical object with the use of three-value logic diagnostic information

Key words

Servicing system, expert systems, knowledge base, diagnostic information.

Tworzenie informacji obsługowej wspomagającej obsługiwanie obiektu technicznego wykorzystując trójwartościową informację diagnostyczną

Słowa kluczowe

System obsługiwania, systemy ekspertowe, baza wiedzy, informacja diagnostyczna.
ZEM v44, nr 3 (159), 2009


Read More (2102 bytes) Print
Numerical study of delamination propagation in polymer-based laminates during qu
on: Tue 22 of Jun, 2010[12:11 UTC]  (64 reads)

ANDRZEJ KATUNIN*

Numerical study of delamination propagation in polymer-based laminates during quasi-static loading

Key words

Mode II delamination, polymer-based laminates, delamination propagation.

Badania numeryczne propagacji delaminacji w polimerowych laminatach podczas obciążeń quasi-statycznych

Słowa kluczowe

Delaminacja II rodzaju, laminaty polimerowe, propagacja delaminacji.
ZEM v44, nr 3 (159), 2009


Read More (3413 bytes) Print
A probabilistic method of determining fatigue life of a structural component usi
on: Tue 22 of Jun, 2010[12:09 UTC]  (54 reads)

HENRYK TOMASZEK*, SŁAWOMIR KLIMASZEWSKI*, MARIUSZ ZIEJA*

A probabilistic method of determining fatigue life of a structural component using the Paris formula and the probability density function of time of exceeding the boundary condition – an outline**

Key words

Fatigue life, density function, fatigue cracking.

Zarys probabilistycznej metody wyznaczania trwałości zmęczeniowej elementu konstrukcji z wykorzystaniem wzoru Parisa i funkcji gęstości czasu przekraczania stanu granicznego*

Słowa kluczowe

Trwałość zmęczeniowa, funkcja gęstości, pękanie zmęczeniowe.
ZEM v44, nr 3 (159), 2009


Read More (2871 bytes) Print
he outline of the method for determining the fatigue limit of an element of aero
on: Tue 22 of Jun, 2010[12:07 UTC]  (44 reads)

TOMASZEK HENRYK*, ŻUREK JÓZEF*, STĘPIEŃ SŁAWOMIR**

The outline of the method for determining the fatigue limit of an element of aeronautical construction with the use of the density function of time of the limit state exceedance

Key words

Fatigue crack, limit state (admissible state), density function, fatigue limit.

Zarys metody wyznaczenia trwałości zmęczeniowej elementu konstrukcji lotniczej z wykorzystaniem funkcji gęstości czasu przekraczania stanu granicznego

Słowa kluczowe

Pękanie zmęczeniowe, stan graniczny (dopuszczalny), funkcja gęstości, trwałość zmęczeniowa.
ZEM v44, nr 3 (159), 2009


Read More (2228 bytes) Print
First research works on LCA at Poznań University of Technology
on: Tue 22 of Jun, 2010[12:06 UTC]  (43 reads)

ZBIGNIEW KŁOS*

First research works on LCA at Poznań University of Technology

Key words

LCA, first research, Poznań University of Technology.

Pierwsze badania nad LCA w Politechnice Poznańskiej

Słowa kluczowe

LCA, pierwsze badania naukowe, Politechnika Poznańska.
ZEM v44, nr 3 (159), 2009


Read More (1980 bytes) Print
CONTENTS ZEM v44, nr 4 (160), 2009
on: Tue 22 of Jun, 2010[11:59 UTC]  (42 reads)
Read More (3047 bytes) Print
SPIS TREŚCI ZEM v44, nr 4 (160), 2009
on: Tue 22 of Jun, 2010[11:58 UTC]  (30 reads)
Read More (3105 bytes) Print
echnological providing of surface layer quality parameters during the machining
on: Tue 22 of Jun, 2010[11:57 UTC]  (48 reads)

VYACHESLAV F. BEZJAZYCHNYJ *, ALEXANDER N. SUTYAGIN*

Technological providing of surface layer quality parameters during the machining

Key words

Friction, wear, surface layer, quality parameters, machining.
ZEM v44, nr 4 (160), 2009


Read More (613 bytes) Print
Specific phenomena that characterize thermal fatigue wear of the forging die ste
on: Tue 22 of Jun, 2010[11:55 UTC]  (33 reads)

ADRIAN C. DRUMEANU*, STELIAN T. PARSCHIVOIU**, IOAN TUDOR*, RAZVAN G. RIPEANU**

Specific phenomena that characterize thermal fatigue wear of the forging die steels

Key words

Non-isothermal fatigue wear, forging die steel, cyclic strengthening/softening.
ZEM v44, nr 4 (160), 2009


Read More (1289 bytes) Print
Biodegradable lubricating greases for special work conditions
on: Tue 22 of Jun, 2010[11:52 UTC]  (41 reads)

ORTANSA FLOREA*, VASILE MATEI**

Biodegradable lubricating greases for special work conditions

Key words

Greases, environment, lubricating fluids, vegetable oils, synthetic esters.
ZEM v44, nr 4 (160), 2009


Read More (1345 bytes) Print
The functional atom of tribology and its application
on: Tue 22 of Jun, 2010[11:50 UTC]  (46 reads)

M. KANDEVA*, M. MANOLOVA-DANEVA**

The functional atom of tribology and its application

Key words

Functional atom, macrostructure of body, friction, wear, lubrication.
ZEM v44, nr 4 (160), 2009


Read More (1559 bytes) Print
Study of structure and properties of modified Armenian minerals for composite po
on: Tue 22 of Jun, 2010[11:48 UTC]  (41 reads)

ARSEN N. KARAPETYAN*, ALBERT K. POGOSIAN*, KARINE V. HOVHANNISYAN*

Study of structure and properties of modified Armenian minerals for composite polymer-based self-lubricating materials

Key words

Mineral filler, fluoroalcon, friction coefficient, surface energy, solubility.
ZEM v44, nr 4 (160), 2009


Read More (940 bytes) Print
Calculation of the contact temperature of a friction couple with a high-speed he
on: Tue 22 of Jun, 2010[11:47 UTC]  (43 reads)

YU.G. KRAVCHENKO*, B.I. PELESHENKO**, A.I. BURYA**, O.YU. KUZNETSOVA2

Calculation of the contact temperature of a friction couple with a high-speed heat source

Keywords

Heat source density, high-speed sources of heat, temperature field.
ZEM v44, nr 4 (160), 2009


Read More (734 bytes) Print
The development of a simplified test rig for measuring the average friction torq
on: Tue 22 of Jun, 2010[11:46 UTC]  (48 reads)

G.A. LIVANOS*

The development of a simplified test rig for measuring the average friction torque of the piston-crank-slider mechanism of an internal combustion engine

ZEM v44, nr 4 (160), 2009


Read More (1335 bytes) Print
Calculation of contact durability in rotary mechanism on the example of timber-l
on: Tue 22 of Jun, 2010[11:44 UTC]  (34 reads)

VLADISLAV I. MAKSAK*, TATIANA V. MAKSAK **

Calculation of contact durability in rotary mechanism on the example of timber-loader

Key words

Timber-loader, rotary mechanism, contact module of elastic-plasticity, contact of bodies with curvilinear surfaces.
ZEM v44, nr 4 (160), 2009


Read More (823 bytes) Print
Eutectic reaction of crystallisation – as the way of increasing tribotechnical
on: Tue 22 of Jun, 2010[11:42 UTC]  (60 reads)

V.E. PANARIN*, I.L. OBORSKIJ**

Eutectic reaction of crystallisation – as the way of increasing tribotechnical characteristics of alloys

Key words

Eutectic crystallisation, structure, properties, wears, coatings, PVD sputtering, iron-based, interstitial phases.
ZEM v44, nr 4 (160), 2009


Read More (691 bytes) Print
SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 44 NR 2 (158) 2009
on: Thu 04 of Feb, 2010[20:04 UTC]  (172 reads)

SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 44 NR 2 (158) 2009

CONTENTS: ZEM_2-2009_s_001-006.pdf (113.36 Kb) ZEM_2-2009_s_001-006.pdf (113.36 Kb)

ZEM v44, nr 2 (158), 2009 : ZEM_2-2009_001-110_calosc.pdf (3.74 Mb) ZEM_2-2009_001-110_calosc.pdf (3.74 Mb)

Read More (2446 bytes) Print
ZEM V 44 NR 2 (158) 2009 SPIS TREŚCI
on: Thu 04 of Feb, 2010[20:02 UTC]  (131 reads)

SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 44 NR 2 (158) 2009

SPIS TREŚCI ZEM_2-2009_s_001-006.pdf (113.36 Kb) ZEM_2-2009_s_001-006.pdf (113.36 Kb)

ZEM v44, nr 2 (158), 2009 ZEM_2-2009_001-110_calosc.pdf (3.74 Mb) ZEM_2-2009_001-110_calosc.pdf (3.74 Mb)

Read More (2482 bytes) Print
The formation of antiwear surface layers on elements of machine parts
on: Thu 04 of Feb, 2010[19:59 UTC]  (116 reads)

BOGDAN ANTOSZEWSKI*

The formation of antiwear surface layers on elements of machine parts

Kształtowanie przeciwzużyciowych warstw powierzchniowych na elementach części maszyn

Key words

Thermal spraying, electro-spark deposition, laser treatment, coating.

Słowa kluczowe

Natryskiwanie cieplne, powłoki elektroiskrowe, obróbka laserowa.

TRIBOLOGY

ZEM v44, nr 2 (158), 2009

Read More (3229 bytes) Print
The flow oil analysis in the gap of a journal bearing with a circumferential gro
on: Thu 04 of Feb, 2010[19:57 UTC]  (161 reads)

JAROSŁAW SĘP*

The flow oil analysis in the gap of a journal bearing with a circumferential groove

Analiza przepływu oleju w łożysku ślizgowym z rowkiem na czopie

Key words

Journal bearing, oil flow, finite element method.

Słowa kluczowe

Łożysko ślizgowe, przepływ oleju, metoda elementów skończonych.

TRIBOLOGY

ZEM v44, nr 2 (158), 2009

Read More (1641 bytes) Print
The modelling of the reliability of selected devices in an aircraft under condit
on: Thu 04 of Feb, 2010[19:55 UTC]  (188 reads)

HENRYK TOMASZEK*, MARIUSZ WAŻNY**

The modelling of the reliability of selected devices in an aircraft under conditions of the accumulation of effects of destructive processes

Modelowanie niezawodności wybranych urządzeń statku powietrznego w warunkach kumulowania skutków działania procesów destrukcyjnych

Key words

Reliability, limit state, diagnostic parameter, nominal value, deviation from nominal value.

Słowa kluczowe

Niezawodność, stan graniczny, parametr diagnostyczny, wartość nominalna, odchyłka od wartości nominalnej.

RELIABILITY

ZEM v44, nr 2 (158), 2009

Read More (1783 bytes) Print
Operation of an aircraft with risk of its loss
on: Thu 04 of Feb, 2010[19:52 UTC]  (164 reads)

HENRYK TOMASZEK*, JÓZEF ŻUREK*, SŁAWOMIR STĘPIEŃ**

Operation of an aircraft with risk of its loss

Eksploatacja statku powietrznego z ryzykiem jego utraty

Key words

Reliability, risk, intensity, probability.

Słowa kluczowe

Niezawodność, ryzyko, intenstywność, prawdopodobieństwo.

RELIABILITY

ZEM v44, nr 2 (158), 2009


Read More (2216 bytes) Print
Determination of an expert knowledge base for servicing of a repairable technica
on: Thu 04 of Feb, 2010[19:50 UTC]  (130 reads)

STANISŁAW DUER*

Determination of an expert knowledge base for servicing of a repairable technical object

Wyznaczanie ekspertowej bazy wiedzy do obsługiwania naprawialnego obiektu technicznego

Key words

Servicing process, expert system, neural networks, diagnostic information.

Słowa kluczowe

Proces obsługiwania, systemy ekspertowe, sieci neuronowe, informacja diagnostyczna.

DIAGNOSTICS

ZEM v44, nr 2 (158), 2009

Read More (1781 bytes) Print
Self-heating effect in laminate plates during harmonic forced loading
on: Thu 04 of Feb, 2010[19:49 UTC]  (114 reads)

ANDRZEJ KATUNIN*

Self-heating effect in laminate plates during harmonic forced loading

Efekt samorozgrzewania w płytach laminatowych podczas harmonicznych obciążeń wymuszonych

Key words

Self-heating, polymer laminates, diagnostics of laminates, model-based diagnostics.

Słowa kluczowe

Samorozgrzewanie, laminaty polimerowe, diagnostyka laminatów, diagnostyka wsparta modelowo.

DIAGNOSTICS

ZEM v44, nr 2 (158), 2009

Read More (4060 bytes) Print
LCA in Poznań and Poland. Research teams and their achievements
on: Thu 04 of Feb, 2010[19:47 UTC]  (113 reads)

ZBIGNIEW KŁOS*, PRZEMYSŁAW KURCZEWSKI*

LCA in Poznań and Poland. Research teams and their achievements

LCA w Poznaniu i w Polsce. Zespoły badawcze i ich osiągnięcia

Key words

LCA, Poznań, Poland, research centres, research activities.

Słowa kluczowe

LCA, Poznań, Polska, centra badawcze, działalność badawcza.

ECO-ENGINEERING

ZEM v44, nr 2 (158), 2009

Read More (1841 bytes) Print
Life Cycle Management as a concept for industrial application
on: Thu 04 of Feb, 2010[19:45 UTC]  (145 reads)

PRZEMYSŁAW KURCZEWSKI*

Life Cycle Management as a concept for industrial application

Zarządzanie cyklem życia jako koncepcja do stosowania w przemyśle

Key words

Management, life cycle, quality, environment, cost.

Słowa kluczowe

Zarządzanie, cykl życia, jakość, środowisko, koszt.
  • Poznań University of Technology, Faculty of Working Machines and Transportation, Institute of Working Machines and Transportation Piotrowo 3 St., 60-965 Poznań, Poland.

ECO-ENGINEERING

ZEM v44, nr 2 (158), 2009

Read More (2832 bytes) Print
SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 44 NR 1 (157) 2009
on: Thu 14 of Jan, 2010[17:46 UTC]  (128 reads)

SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE V 44 NR 1 (157) 2009

CONTENTS

ZEM v44, nr 1 (157), 2009


Read More (2274 bytes) Print
Tribological properties of surface layer with boron
on: Thu 14 of Jan, 2010[17:45 UTC]  (141 reads)

JANUSZ LUBAS*

Tribological properties of surface layer with boron

Key words

Wear, sliding friction, surface treatment, boron.

Słowa kluczowe

Zużycie, tarcie ślizgowe, obróbka powierzchniowa, bor.

TRIBOLOGY

ZEM v44, nr 1 (157), 2009


Read More (1404 bytes) Print
The study of rotating units in turbochargers, the influence of relative clearanc
on: Thu 14 of Jan, 2010[17:43 UTC]  (164 reads)

ALEKSANDER MAZURKOW*

The study of rotating units in turbochargers, the influence of relative clearance in sliding bearings with a floating ring on static and dynamic properties

Key words

Turbocharger, rotating unit, sliding bearing with a floating ring, rigidity and damping factor.

Słowa kluczowe

Turbosprężarka, zespół wirujący, łożysko ślizgowe z panewką pływającą, współczynniki sztywności i tłumienia.

TRIBOLOGY

ZEM v44, nr 1 (157), 2009


Read More (1533 bytes) Print
Accuracy of reliability measures of water supply and sewage facilities
on: Thu 14 of Jan, 2010[17:42 UTC]  (165 reads)

RYSZARDA IWANEJKO*

Accuracy of reliability measures of water supply and sewage facilities

Key words

Reliability, reliability measures, method’s error

Słowa kluczowe

Niezawodność, miary niezawodności, błąd metody.

RELIABILITY

ZEM v44, nr 1 (157), 2009


Read More (1467 bytes) Print
The modification of the amount of operational potential during the exploitation
on: Thu 14 of Jan, 2010[17:41 UTC]  (148 reads)

MICHAŁ PAJĄK*

The modification of the amount of operational potential during the exploitation phase of a complex technical object

Key words

Exploitation, Maintenance management, Operational potential.

Słowa kluczowe

Eksploatacja, zarządzanie eksploatacją, potencjał użytkowy.

TEROTECHNOLOGY

ZEM v44, nr 1 (157), 2009


Read More (1550 bytes) Print
Classification of the elements of the object’s maintenance structure of a repa
on: Thu 14 of Jan, 2010[17:40 UTC]  (143 reads)

STANISŁAW DUER*

Classification of the elements of the object’s maintenance structure of a repairable technical object

Key words

Technical operation, control systems, technical diagnostics, neural networks, knowledge bases.

Słowa kluczowe

Obsługiwanie techniczne, systemy sterowania, diagnostyka techniczna, sieci neuronowe, bazy wiedzy.

DIAGNOSTIC

ZEM v44, nr 1 (157), 2009


Read More (1333 bytes) Print
Standard accuracy tests of machine-tools prognosis in their state
on: Thu 14 of Jan, 2010[17:39 UTC]  (161 reads)

MICHAŁ STYP-REKOWSKI*

Standard accuracy tests of machine-tools prognosis in their state

Key words

Machine-tool, technical state, accuracy test, diagnosing, prognosis.

Słowa kluczowe

Obrabiarka, stan techniczny, badanie dokładności, diagnozowanie, prognozowanie.

DIAGNOSTIC

ZEM v44, nr 1 (157), 2009


Read More (1416 bytes) Print
Operation period processes of food industry machines and devices – analysis of
on: Thu 14 of Jan, 2010[17:37 UTC]  (128 reads)

JĘDRZEJ KASPRZAK*

Operation period processes of food industry machines and devices – analysis of environmental impacts

Key words

Ecobalancing, operation period, disposal, food industry, machine.

Słowa kluczowe

Ekobilansowanie, eksploatacja, zagospodarowanie, przemysł spożywczy, maszyna.

ECO-ENGINEERING

ZEM v44, nr 1 (157), 2009


Read More (1168 bytes) Print

on: Thu 14 of Jan, 2010[17:36 UTC]  (156 reads)

ROBERT LEWICKI*

End-of-life vehicles in the light of environmental benefits identified in the products’ life cycle

Key words

End-of-life vehicle, recycling, utilisation, LCA.

Słowa kluczowe

Samochód wycofany z eksploatacji, recykling, utylizacja, LCA.

ECO-ENGINEERING

ZEM v44, nr 1 (157), 2009


Read More (1261 bytes) Print
SPIS TREŚCI
on: Thu 04 of Jun, 2009[17:14 UTC]  (268 reads)

ZAGADNIENIA EKSPLOATACJI MASZYN 3 (155) 2008

SPIS TREŚCI

ZEM_4_08_s_1-6.pdf Treść 48.3 kB


Read More (1815 bytes) Print
The surface topography influence on tribology phenomenon proceedings in exploit
on: Thu 04 of Jun, 2009[17:12 UTC]  (228 reads)

ZDZISŁAW BRONIEC*, JANINA DACA*, WŁODZIMIERZ FIGIEL*

The surface topography influence on tribology phenomenon proceedings in exploitation investigation of drawing dies

ZEM v43, nr 4 (156), 2008


Read More (2156 bytes) Print
Comparison of wear processes of biomaterials used in hip joint implants
on: Thu 04 of Jun, 2009[17:10 UTC]  (221 reads)

J.A. ORTEGA-SAENZ*, M. KALBARCZYK**, R. MICHALCZEWSKI**, W. PIEKOSZEWSKI**, M. SZCZEREK**

Comparison of wear processes of biomaterials used in hip joint implants

ZEM v43, nr 4 (156), 2008


Read More (2947 bytes) Print
Comments on the improvement of the military aircraft operation by limiting the p
on: Thu 04 of Jun, 2009[17:09 UTC]  (204 reads)

HENRYK TOMASZEK*, MICHAŁ JASZTAL**

Comments on the improvement of the military aircraft operation by limiting the possibilities of damage formation

ZEM v43, nr 4 (156), 2008


Read More (2244 bytes) Print
The airship maintenance with its renovation and the risk of its loss
on: Thu 04 of Jun, 2009[17:07 UTC]  (216 reads)

HENRYK TOMASZEK*, JÓZEF ŻUREK*, SŁAWOMIR STĘPIEŃ **

The airship maintenance with its renovation and the risk of its loss

ZEM v43, nr 4 (156), 2008


Read More (2294 bytes) Print
Analysis of materials' flow in a steel mill in order to determine exploitation p
on: Thu 04 of Jun, 2009[17:06 UTC]  (238 reads)

BOLESŁAW KARWAT*

Analysis of materials' flow in a steel mill in order to determine exploitation parameters of technological line's devices

ZEM v43, nr 4 (156), 2008


Read More (3311 bytes) Print
Identification of combustion engine static states in real operation conditions o
on: Thu 04 of Jun, 2009[17:04 UTC]  (221 reads)

EWA MARECKA-CHŁOPEK*, EUGENIUSZ BUDNY* ZDZISŁAW CHŁOPEK**, MIROSŁAW CHŁOSTA*

Identification of combustion engine static states in real operation conditions of an earthmoving machine

ZEM v43, nr 4 (156), 2008


Read More (4371 bytes) Print
Determination of diagnostic information of a technical object on the basis of a
on: Thu 04 of Jun, 2009[17:03 UTC]  (359 reads)

STANISŁAW DUER*

Determination of diagnostic information of a technical object on the basis of a functional and diagnostic analysis on example of a car engine

ZEM v43, nr 4 (156), 2008


Read More (2872 bytes) Print
Diagnostic investigations of critical technical systems
on: Thu 04 of Jun, 2009[16:56 UTC]  (265 reads)

BOGDAN ŻÓŁTOWSKI*

Diagnostic investigations of critical technical systems

ZEM v43, nr 4 (156), 2008


Read More (1737 bytes) Print
SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE 3 (155) 2008 CONTENTS
on: Tue 31 of Mar, 2009[20:48 UTC]  (330 reads)

SCIENTIFIC PROBLEMS OF MACHINES OPERATION AND MAINTENANCE 3 (155) 2008

CONTENTS

ZEM_3-2008_cz_0_spis.pdf (75.86 Kb)
Cover: ZEM 3/2008 1.0 MB


Read More (1949 bytes) Print
ZAGADNIENIA EKSPLOATACJI MASZYN 3 (155) 2008 SPIS TREŚCI
on: Tue 31 of Mar, 2009[20:46 UTC]  (279 reads)

ZAGADNIENIA EKSPLOATACJI MASZYN 3 (155) 2008

SPIS TREŚCI

ZEM_3-2008_cz_0_spis.pdf (75.86 Kb)
Cover: ZEM 3/2008 1.0 MB


Read More (1954 bytes) Print
The influence of dynamic properties of tribotesters on coefficient of friction
on: Tue 31 of Mar, 2009[20:44 UTC]  (311 reads)

DEMOFILO MALDONADO*

The influence of dynamic properties of tribotesters on coefficient of friction

ZEM v43, nr 3 (155), 2008

Read More (5140 bytes) Print
Assessing production process reliability using statistical methods
on: Tue 31 of Mar, 2009[20:42 UTC]  (271 reads)

MAŁGORZATA HEINRICH*, GRAŻYNA JASICA*

Assessing production process reliability using statistical methods

ZEM v43, nr 3 (155), 2008

Read More (2436 bytes) Print
Selected issues concerning preparation for the monitoring and detection of fatig
on: Tue 31 of Mar, 2009[20:40 UTC]  (201 reads)

HENRYK TOMASZEK∗, SŁAWOMIR KLIMASZEWSKI*, MICHAŁ JASZTAL∗∗

Selected issues concerning preparation for the monitoring and detection of fatigue fractures in elements of aircraft construction

ZEM v43, nr 3 (155), 2008

Read More (2405 bytes) Print
The outline of the assessment of durability against surface wear of a constructi
on: Tue 31 of Mar, 2009[20:39 UTC]  (226 reads)

HENRYK TOMASZEK∗, MARIUSZ WAŻNY∗∗

The outline of the assessment of durability against surface wear of a construction element with the use of the distribution of time of the exceedence of limit state (admissible state)

ZEM v43, nr 3 (155), 2008

Read More (2419 bytes) Print
Research results transformation in the process of innovation development illustr
on: Tue 31 of Mar, 2009[20:36 UTC]  (235 reads)

TOMASZ GIESKO∗, MAGDALENA TRZOS*

Research results transformation in the process of innovation development illustrated by the example of automatic optical inspection

ZEM v43, nr 3 (155), 2008

Read More (2749 bytes) Print
Diagnosing disturbances in the fuel inflow to cylinders with the use of DWT anal
on: Tue 31 of Mar, 2009[20:31 UTC]  (256 reads)

HENRYK MADEJ*, PIOTR CZECH**

Diagnosing disturbances in the fuel inflow to cylinders with the use of DWT analysis and PNN neural networks

ZEM v43, nr 3 (155), 2008

Read More (2959 bytes) Print
Investigations of fume emissions of combustion engines
on: Tue 31 of Mar, 2009[20:29 UTC]  (245 reads)

BOGDAN ŻÓŁTOWSKI*

Investigations of fume emissions of combustion engines

ZEM v43, nr 3 (155), 2008

Read More (1323 bytes) Print
he analysis of hazardous events during tankers operations
on: Tue 31 of Mar, 2009[20:26 UTC]  (299 reads)

LEONARD HEMPEL∗, JERZY KREFFT*

The analysis of hazardous events during tankers operations

ZEM v43, nr 3 (155), 2008

Read More (4667 bytes) Print
CONTENTS ZEM v43, nr 2, 2008
on: Thu 06 of Nov, 2008[13:30 UTC]  (222 reads)
Read More (1745 bytes) Print
SPIS TREŚCI ZEM v43, nr 2, 2008
on: Thu 06 of Nov, 2008[13:28 UTC]  (244 reads)
Read More (1677 bytes) Print
Journal bearing with an intensive axial oil flow – computer simulations
on: Thu 06 of Nov, 2008[13:02 UTC]  (212 reads)

JAROSŁAW SĘP*

Journal bearing with an intensive axial oil flow – computer simulations

ZEM v43, nr 2, 2008

Read More (1794 bytes) Print
Journal bearing with an intensive axial oil flow – experimental investigation
on: Thu 06 of Nov, 2008[13:00 UTC]  (231 reads)

JAROSŁAW SĘP*

Journal bearing with an intensive axial oil flow – experimental investigation

ZEM v43, nr 2, 2008

Read More (1773 bytes) Print
Division and investigation of damages to technical objects and their influence
on: Thu 06 of Nov, 2008[12:58 UTC]  (252 reads)

ANDRZEJ WDZIĘCZNY*, MACIEJ WOROPAY*,

ŁUKASZ MUŚLEWSKI**

Division and investigation of damages to technical objects and their influence on the reliability of operations of complex operation and maintenance systems

ZEM v43, nr 2, 2008

Read More (4243 bytes) Print
Terotechnology versus Exploitation Theory – some remarks
on: Thu 06 of Nov, 2008[12:56 UTC]  (401 reads)

JACEK M. CZAPLICKI*

Terotechnology versus Exploitation Theory – some remarks

ZEM v43, nr 2, 2008

Read More (2986 bytes) Print
Energy efficiency of hydrostatic transmission. Comparing results of laboratory a
on: Thu 06 of Nov, 2008[12:54 UTC]  (248 reads)

MICHAŁ CZYŃSKI*

Energy efficiency of hydrostatic transmission. Comparing results of laboratory and simulation tests

ZEM v43, nr 2, 2008

Read More (1470 bytes) Print
Production scheduling in a steel working plant
on: Thu 06 of Nov, 2008[12:52 UTC]  (231 reads)

BOLESŁAW KARWAT*

Production scheduling in a steel working plant

ZEM v43, nr 2, 2008

Read More (1988 bytes) Print
Application of the histogram of the vibration spectrum of an engine block for
on: Thu 06 of Nov, 2008[12:50 UTC]  (285 reads)

HENRYK MADEJ*, PIOTR CZECH**

Application of the histogram of the vibration spectrum of an engine block for setting up the clearance model of the piston-cylinder assembly for PNN neural classifier

ZEM v43, nr 2, 2008

Read More (1570 bytes) Print
The research of the dynamic properties of rotating units in turbochargers
on: Thu 06 of Nov, 2008[12:46 UTC]  (328 reads)

ALEKSANDER MAZURKOW*

The research of the dynamic properties of rotating units in turbochargers

ZEM v43, nr 2, 2008

Read More (2935 bytes) Print
Profits from the modernization of the start-up procedures for steam turbines aim
on: Fri 23 of May, 2008[10:17 UTC]  (300 reads)

GERARD KOSMAN∗

Profits from the modernization of the start-up procedures for steam turbines aimed to achieve the planned lifetime

ZEM v43, No 1, 2008

Read More (1705 bytes) Print
An algorithm for the diagnosis of reparable technical objects utilising artifici
on: Fri 23 of May, 2008[10:16 UTC]  (254 reads)

STANISŁAW DUER*

An algorithm for the diagnosis of reparable technical objects utilising artificial neural network

ZEM v43, No 1, 2008

Read More (1748 bytes) Print
The influence of hydraulic pressure conduits’ parameters on the course of unst
on: Fri 23 of May, 2008[10:16 UTC]  (279 reads)

ZBIGNIEW ZARZYCKI*, KAMIL URBANOWICZ*

The influence of hydraulic pressure conduits’ parameters on the course of unsteady flow with cavitation

ZEM v43, No 1, 2008

Read More (2029 bytes) Print
Numerical-experimental analysis of durability of adhesive joints loaded in raise
on: Fri 23 of May, 2008[10:15 UTC]  (259 reads)

MAREK ROŚKOWICZ*, TOMASZ SMAL**

Numerical-experimental analysis of durability of adhesive joints loaded in raised temperature conditions

ZEM v43, No 1, 2008

Read More (2491 bytes) Print
Decision-making system of transport devices supporting operation reliability pro
on: Fri 23 of May, 2008[10:14 UTC]  (250 reads)

ARTUR KOCERBA*, JANUSZ SZPYTKO*

Decision-making system of transport devices supporting operation reliability process shaping

ZEM v43, No 1, 2008

Read More (2373 bytes) Print
Contribution in biobearing lubrication
on: Fri 23 of May, 2008[10:13 UTC]  (278 reads)

K.CH. WIERZCHOLSKI*, Y. NYASHIN**, V. LOGHOV**

Contribution in biobearing lubrication

ZEM v43, No 1, 2008

Read More (2435 bytes) Print
The research in oil and heat flow of a short sliding bearing with a floating
on: Fri 23 of May, 2008[10:12 UTC]  (234 reads)

ALEKSANDER MAZURKOW*

The research in oil and heat flow of a short sliding bearing with a floating ring bearing

ZEM v43, No 1, 2008

Read More (2426 bytes) Print
The correlation between 3D surface parameters of a ceramic element and the
on: Fri 23 of May, 2008[10:10 UTC]  (271 reads)

MAREK KALBARCZYK*, REMIGIUSZ MICHALCZEWSKI*, WITOLD PIEKOSZEWSKI*, MARIAN SZCZEREK*

The correlation between 3D surface parameters of a ceramic element and the tribological characteristics in ceramic-polymer joints

ZEM v43, No 1, 2008

Read More (2466 bytes) Print
SPIS TREŚCI: ZEM v43, No 1, 2008
on: Fri 23 of May, 2008[10:09 UTC]  (290 reads)
ZEM v43, No 1, 2008

Read More (1923 bytes) Print
CONTENTS, ZEM v43, 2008, No1
on: Fri 23 of May, 2008[10:00 UTC]  (249 reads)
Read More (1855 bytes) Print
On how to use expert judgments in regularity analyses to obtain good predictions
on: Mon 25 of Feb, 2008[18:39 UTC]  (346 reads)

A. HJORTELAND, T. AVEN

On how to use expert judgments in regularity analyses to obtain good predictions

W jaki sposób posługiwać się opiniami ekspertów w analizach regularności dostaw w celu uzyskania rzetelnych prognoz

ZEM v42 no 3, 2007

Read More (2545 bytes) Print
Technical stability – a new modelling perspective for building solutions of mo
on: Mon 25 of Feb, 2008[18:38 UTC]  (292 reads)

WOJCIECH BATKO

Technical stability – a new modelling perspective for building solutions of monitoring systems for machinery state1

Stateczność techniczna – nowa perspektywa modelowa dla budowy rozwiązań systemów monitorujących zmiany stanu maszyn

Keywords

Phase trajectory, technical diagnostics, monitoring, technical stability
ZEM v42 no 3, 2007

Read More (1854 bytes) Print
Zagadnienie podobieństwa w badaniach oporów ruchu przenośnika zgrzebłowego r
on: Mon 25 of Feb, 2008[18:37 UTC]  (334 reads)

KAZIMIERZ FURMANIK, PIOTR KASZA

Zagadnienie podobieństwa w badaniach oporów ruchu przenośnika zgrzebłowego rurowego

Problem of mechanical similarity in investigations of resistance to motion of scarper pipe conveyors

ZEM v42 no 3, 2007

Read More (2878 bytes) Print
Complex evaluation of service properties of car insulation bodies
on: Mon 25 of Feb, 2008[18:36 UTC]  (302 reads)

KRZYSZTOF BIEŃCZAK

Complex evaluation of service properties of car insulation bodies

Kompleksowa ocena własności eksploatacyjnych samochodowych nadwozi izotermicznych

ZEM v42 no 3, 2007

Read More (1376 bytes) Print
Wpływ cech konstrukcyjnych hamulca tarczowego maszyny wyciągowej na jego niest
on: Mon 25 of Feb, 2008[18:35 UTC]  (475 reads)

STANISŁAW ŚCIESZKA, MARCEL ŻOŁNIERZ

Wpływ cech konstrukcyjnych hamulca tarczowego maszyny wyciągowej na jego niestabilność termosprężystą.

Część I. Budowa modelu MES i jego weryfikacja

The effect of the mine winder disc brake's design feature on its thermoelastic instability.

Part I. Set-up for finite element modelling and numerical model verification

ZEM v42 no 3, 2007

Read More (2207 bytes) Print
Zarys metody wyznaczenia ryzyka uszkodzenia i trwałości zmęczeniowej wybranyc
on: Mon 25 of Feb, 2008[18:33 UTC]  (326 reads)

RYSZARD SZCZEPANIK, HENRYK TOMASZEK, MICHAŁ JASZTAL

Zarys metody wyznaczenia ryzyka uszkodzenia i trwałości zmęczeniowej wybranych elementów konstrukcji lotniczych w warunkach eksploatacji z zastosowaniem wzoru Parisa dla m≠ 2

Outline of the method of damage risk and fatigue life determination selected aircraft’s elements in using condition, with use of Paris formula for m≠2

ZEM v42 no 3, 2007

Read More (2228 bytes) Print
Tendencje rozwojowe w modelowaniu zjawisk i procesów tribologicznych
on: Mon 25 of Feb, 2008[18:32 UTC]  (326 reads)

MAGDALENA TRZOS

Tendencje rozwojowe w modelowaniu zjawisk i procesów tribologicznych

Developmental tendencies of modelling the tribological system

ZEM v42 no 3, 2007

Read More (1672 bytes) Print
Zarys metody oceny trwałości zmęczeniowej wybranych elementów konstrukcji
on: Mon 25 of Feb, 2008[18:32 UTC]  (255 reads)

HENRYK TOMASZEK, JÓZEF ŻUREK, MICHAŁ JASZTAL

Zarys metody oceny trwałości zmęczeniowej wybranych elementów konstrukcji lotniczych w warunkach eksploatacyjnego widma obciążenia dla wzoru Parisa o wykładniku m≠2

Outline of the method of fatigue life determination selected aircraft’s elements in using load spectrum condition, with use of Paris formula for m≠2

ZEM v42 no 3, 2007

Read More (1642 bytes) Print
Komputerowe wspomaganie badań tribologicznych
on: Mon 25 of Feb, 2008[18:31 UTC]  (331 reads)

MIECZYSŁAW KORZYŃSKI, JAROSŁAW SĘP

Komputerowe wspomaganie badań tribologicznych

Computer aided tribological research

ZEM v42 no 3, 2007

Read More (3313 bytes) Print
The influence of dynamic viscosity changes caused by pressure on the capacity of
on: Mon 25 of Feb, 2008[18:26 UTC]  (356 reads)

MARIUSZ KOPROWSKI

The influence of dynamic viscosity changes caused by pressure on the capacity of conical slide bearings

Wpływ zmian lepkości dynamicznej oleju od ciśnienia na nośność stożkowego łożyska ślizgowego

ZEM v42 no 3, 2007
Read More (2411 bytes) Print
Tendencje rozwojowe niekonwencjonalnych układów łożyskowych
on: Mon 25 of Feb, 2008[18:25 UTC]  (299 reads)

JAN BURCAN

Tendencje rozwojowe niekonwencjonalnych układów łożyskowych

Trends in the development of unconventional bearing systems

ZEM v42 no 3, 2007
Read More (1560 bytes) Print
Możliwości kwantyfikacji synergizmu w tribologii
on: Mon 25 of Feb, 2008[18:21 UTC]  (269 reads)

TADEUSZ BURAKOWSKI, WOJCIECH NAPADŁEK

Możliwości kwantyfikacji synergizmu w tribologii

About the possibility of quantification in tribology

ZEM v42 no 3, 2007
Read More (5529 bytes) Print
Rozwojowe funkcje spotkań naukowych
on: Mon 25 of Feb, 2008[18:19 UTC]  (253 reads)

WIESŁAW LESZEK

Rozwojowe funkcje spotkań naukowych

Developmental functions of scientific meetings

ZEM v42 no 3, 2007
Read More (1213 bytes) Print
Contents ZEM v42 no 3, 2007
on: Mon 25 of Feb, 2008[18:18 UTC]  (290 reads)

Contents ZEM v42 no 3, 2007, ZEM_3_2007_s_001_006.pdf (75.53 Kb)


Read More (2954 bytes) Print
Spis treści ZEM v42 nr 3, 2007
on: Mon 25 of Feb, 2008[18:15 UTC]  (297 reads)

Spis treści ZEM v42 nr 3, 2007, ZEM_3_2007_s_001_006.pdf (75.53 Kb)


Read More (3074 bytes) Print
Organizational culture and risk perception
on: Mon 25 of Feb, 2008[18:02 UTC]  (285 reads)

R. BYE, G.M. LAMVIK

Organizational culture and risk perception

Kultura organizacyjna i percepcja ryzyka

Keywords

Organizational culture, risk perception, subjective risk, objective risk.
ZEM v42 no 2, 2007

Read More (1862 bytes) Print
Wpływ sprężystości podpór na trwałość łożyskowania wału trzypodporowe
on: Mon 25 of Feb, 2008[18:01 UTC]  (251 reads)

ANDRZEJ RACZYŃSKI, JAROSŁAW KACZOR

Wpływ sprężystości podpór na trwałość łożyskowania wału trzypodporowego

The effect of the rolling bearing elasticity on the durability of three-support bearing shaft

ZEM v42 no 2, 2007

Read More (2721 bytes) Print
Estymacja początkowego okresu niezawodnej pracy łożysk tocznych w pojazdach
on: Mon 25 of Feb, 2008[18:00 UTC]  (328 reads)

MICHAŁ LIBERA, WŁODZIMIERZ WALIGÓRA

Estymacja początkowego okresu niezawodnej pracy łożysk tocznych w pojazdach samochodowych na podstawie badań eksploatacyjnych

The estimation of initial period of reliable work of the roll bearings on the basis of random exploitation investigation

ZEM v42 no 2, 2007

Read More (2661 bytes) Print
Microbearings and microturbines – possibilities of dynamic state assessment
on: Mon 25 of Feb, 2008[17:59 UTC]  (306 reads)

JAN KICIŃSKI

Microbearings and microturbines – possibilities of dynamic state assessment

Mikrołożyska i mikroturbiny – możliwości oceny stanu dynamicznego


Read More (2653 bytes) Print
Analiza oddziaływań dynamicznych na łożyska linii wałów okrętów do zwalc
on: Mon 25 of Feb, 2008[17:59 UTC]  (426 reads)

ANDRZEJ GRZĄDZIELA

Analiza oddziaływań dynamicznych na łożyska linii wałów okrętów do zwalczania min

Analysis of shaft lines dynamic reactions for minehunters

ZEM v42 no 2, 2007

Read More (2920 bytes) Print
Wpływ obwodowego położenia pęknięcia wału turbiny średnioprężnej na dyn
on: Mon 25 of Feb, 2008[17:58 UTC]  (267 reads)

SŁAWOMIR BANASZEK

Wpływ obwodowego położenia pęknięcia wału turbiny średnioprężnej na dynamikę turbozespołu dużej mocy – symulacje komputerowe

The influence of angular crack location of IP turbine rotor on large power turbo-set dynamics – computer simulations

ZEM v42 no 2, 2007

Read More (2768 bytes) Print
Metoda obliczania ślizgowych łożysk wzdłużnych o stałej geometrii przy du
on: Mon 25 of Feb, 2008[17:57 UTC]  (329 reads)

JAN SZKURŁAT, EDWARD MURDZIA

Metoda obliczania ślizgowych łożysk wzdłużnych o stałej geometrii przy dużym wskaźniku obciążenia

Method of calculation of the fixed thrust pad bearings under large characteristic value of load capacity

ZEM v42 no 2, 2007

Read More (2731 bytes) Print
Dobór baz olejowych do węzłów tarcia z elementami pokrytymi powłoką WC/C
on: Mon 25 of Feb, 2008[17:54 UTC]  (295 reads)

ANNA MATUSZEWSKA, REMIGIUSZ MICHALCZEWSKI, MARIAN GRĄDKOWSKI, MARIAN SZCZEREK

Dobór baz olejowych do węzłów tarcia z elementami pokrytymi powłoką WC/C

Selection of base oil for friction pairs with WC/C coated elements

ZEM v42 no 2, 2007

Read More (3004 bytes) Print
Modelowanie rozkładu ciśnienia w filmie olejowym asymetrycznie obciążonego s
on: Mon 25 of Feb, 2008[17:54 UTC]  (452 reads)

JÓZEF SALWIŃSKI, PIOTR GRĄDKOWSKI

Modelowanie rozkładu ciśnienia w filmie olejowym asymetrycznie obciążonego segmentu hydrostatycznego łożyska wzdłużnego

Axial bearing, modeling pressure, slide bearing, hydrostatic lubrication.

ZEM v42 no 2, 2007

Read More (2642 bytes) Print
Nieliniowy model poprzecznego łożyska gazowego o zmiennej geometrii w aplikacj
on: Mon 25 of Feb, 2008[17:53 UTC]  (279 reads)

MARCIN MARTYNA

Nieliniowy model poprzecznego łożyska gazowego o zmiennej geometrii w aplikacji Power MEMS

Non-linear model of a tilting pad gas journal bearing applied in the Power MEMS

ZEM v42 no 2, 2007

Read More (2889 bytes) Print
Ciśnienie i nośność w płaskim łożysku ślizgowym przy niestacjonarnym lam
on: Mon 25 of Feb, 2008[17:52 UTC]  (383 reads)

PAWEŁ KRASOWSKI

Ciśnienie i nośność w płaskim łożysku ślizgowym przy niestacjonarnym laminarnym smarowaniu

Pressure and capacity force in slide journal plane bearing by laminar unsteady lubrication

Contents ZEM v 42 no 2, 2007

Read More (3152 bytes) Print
Contents ZEM v 42 no 2, 2007
on: Mon 25 of Feb, 2008[17:44 UTC]  (255 reads)

Contents ZEM v 42 no 2, 2007: ZEM_2_2007_s_001-006.pdf (72.24 Kb)


Read More (2658 bytes) Print
An approach to estimate radioactive release frequency from Ignalina RBMK-1500 re
on: Mon 25 of Feb, 2008[17:41 UTC]  (306 reads)

V. KOPUSTINSKAS, E. URBONAVIČIUS, A. KALIATKA, S. RIMKEVČIUS, E. UŠPURAS, A. BAGDONAS, P. HELLSTRÖM, G. JOHANSON

An approach to estimate radioactive release frequency from Ignalina RBMK-1500 reactor in Lithuania

Podejście do zagadnienia estymacji częstości uwolnień substancji radioaktywnych z reaktora RBMK-1500 w Ignalinie na Litwie


Read More (1687 bytes) Print
Spis treści ZEM v42 nr 2, 2007
on: Mon 25 of Feb, 2008[17:41 UTC]  (279 reads)

Spis treści ZEM v42 nr 2, 2007 : ZEM_2_2007_s_001-006.pdf (72.24 Kb)


Read More (2784 bytes) Print
Time series – the tool for traffic safety analysis
on: Mon 25 of Feb, 2008[17:40 UTC]  (290 reads)

R. KRYSTEK, J. ŻUKOWSKA

Time series – the tool for traffic safety analysis

Szeregi czasowe – narzędzie analizy bezpieczeństwa ruchu drogowego


Read More (1158 bytes) Print
Reprezentacja wiedzy w komputerowo wspomaganym systemie identyfikacji obszaru za
on: Mon 25 of Feb, 2008[17:39 UTC]  (275 reads)

ANTONI PODSIADŁO, WIESŁAW TAREŁKO

Reprezentacja wiedzy w komputerowo wspomaganym systemie identyfikacji obszaru zagrożenia dla operatora w siłowni okrętowej

Knowledge representation in computer-aided system for hazard zone identification for operators of ship power plants


Read More (4630 bytes) Print
Ocena prawdopodobieństwa uszkodzenia wirników turbin z pęknięciami na podsta
on: Mon 25 of Feb, 2008[17:39 UTC]  (320 reads)

ANDRZEJ RUSIN

Ocena prawdopodobieństwa uszkodzenia wirników turbin z pęknięciami na podstawie badań diagnostycznych

Assessment oh the failure probability of turbine rotors with cracks based on diagnostic tests


Read More (3536 bytes) Print
Influence of algorithms of controlling turbo-charging unit on operational proper
on: Mon 25 of Feb, 2008[17:38 UTC]  (488 reads)

KRZYSZTOF DANILECKI

Influence of algorithms of controlling turbo-charging unit on operational properties of an engine with sequential turbo-charging

Wpływ algorytmów sterowania turbosprężarkowym zespołem doładowującym na właściwości użytkowe silnika z doładowaniem zakresowym


Read More (4128 bytes) Print
Assessment of possibility to improve dust suction efficiency from multicyclone a
on: Mon 25 of Feb, 2008[17:37 UTC]  (315 reads)

TADEUSZ DZIUBAK

Assessment of possibility to improve dust suction efficiency from multicyclone air filter of track vehicle

Ocena możliwości poprawy efektywności odsysania pyłu z odpylacza multicyklonowego filtru powietrza pojazdu gąsienicowego


Read More (2522 bytes) Print
Forecasting of fatigue life of laser welded joints
on: Mon 25 of Feb, 2008[17:36 UTC]  (291 reads)

JANUSZ KOZAK

Forecasting of fatigue life of laser welded joints

Przewidywanie trwałości połączeń spawanych laserowo


Read More (3081 bytes) Print
Wskaźniki niezawodności, ryzyka i oczekiwanej efektywności eksploatacji obiek
on: Mon 25 of Feb, 2008[17:36 UTC]  (886 reads)

OLGIERD DOWNAROWICZ

Wskaźniki niezawodności, ryzyka i oczekiwanej efektywności eksploatacji obiektów technicznych

The dependability, risk and expected efficiency as measuring indices of the physical assets operation and maintenance


Read More (1860 bytes) Print
Parametrical identification of destructive processes in avionic hydraulic drives
on: Mon 25 of Feb, 2008[17:35 UTC]  (292 reads)

LESZEK UŁANOWICZ

Parametrical identification of destructive processes in avionic hydraulic drives

Parametryczna identyfikacja procesów destrukcyjnych lotniczych napędów hydraulicznych


Read More (3533 bytes) Print
Influence of silicones surface activity on tribological properties their aqueous
on: Mon 25 of Feb, 2008[17:34 UTC]  (281 reads)

MARIAN W. SUŁEK, MAŁGORZATA ZIĘBA

Influence of silicones surface activity on tribological properties their aqueous solutions

Wpływ aktywności powierzchniowej silikonów na tribologiczne właściwości ich wodnych roztworów


Read More (1431 bytes) Print
Wodór w warstwach wierzchnich smarowanych węzłów ślizgowych
on: Mon 25 of Feb, 2008[17:33 UTC]  (319 reads)

A. NEYMAN, D. SAMATOWICZ

Wodór w warstwach wierzchnich smarowanych węzłów ślizgowych

Hydrogen in surface layers of lubricated sliding contacts


Read More (2536 bytes) Print
Badania tribologiczne powłok CrN i TiN modyfikujących warstwę wierzchnią czo
on: Mon 25 of Feb, 2008[17:33 UTC]  (411 reads)

JANUSZ LUBAS

Badania tribologiczne powłok CrN i TiN modyfikujących warstwę wierzchnią czopa w aspekcie zastosowania w łożyskach ślizgowych

Applications of CrN and TiN coatings to modified surface layer of kinematic slide pairs


Read More (5812 bytes) Print
Determination of the magnetic field distribution for high-energy magnets
on: Mon 25 of Feb, 2008[17:32 UTC]  (274 reads)

JAN BURCAN, RADOSŁAW BEDNAREK

Determination of the magnetic field distribution for high-energy magnets

Wyznaczanie rozkładu pola magnetycznego dla magnesów wysokoenergetycznych


Read More (2141 bytes) Print
Contents ZEM v42, no 1, 2007
on: Mon 25 of Feb, 2008[17:30 UTC]  (272 reads)

Contents ZEM v42 no 1, 2007 : ZEM_1_2007_s_001-006.pdf (75.74 Kb)


Read More (3155 bytes) Print
Spis treści ZEM v42 nr 1 2007
on: Mon 25 of Feb, 2008[17:28 UTC]  (307 reads)
Read More (3337 bytes) Print
Wpływ sprzężenia ciernego nosiwa z taśmą na możliwości eksploatacyjne prz
on: Thu 14 of Feb, 2008[17:13 UTC]  (380 reads)

KAZIMIERZ FURMANIK*

Wpływ sprzężenia ciernego nosiwa z taśmą na możliwości eksploatacyjne przenośnika taśmowego

The effect of frictional contact of transported material with the belt on operational capacity of belt conveyor

ZEM 4/2007


Read More (2879 bytes) Print
Badanie współpracy tribologicznej tworzywa PEEK/BG ze stalą łożyskową
on: Thu 14 of Feb, 2008[17:12 UTC]  (373 reads)

ADAM GOŁĄB*, WŁADYSŁAW SKONECZNY*

Badanie współpracy tribologicznej tworzywa PEEK/BG ze stalą łożyskową

Testing the tribological exploitation of PEEK/BG material and bearing steel

ZEM 4/2007


Read More (3511 bytes) Print
Parametry pracy adiabatycznego modelu łożyska krótkiego z panewką pływając
on: Thu 14 of Feb, 2008[17:11 UTC]  (380 reads)

ALEKSANDER MAZURKOW*

Parametry pracy adiabatycznego modelu łożyska krótkiego z panewką pływającą

Parameters of an adiabatic model short floating ring bearing work

ZEM 4/2007


Read More (1444 bytes) Print
Analiza termodynamiczna cech systemu tribologicznego na przykładzie wybranych b
on: Thu 14 of Feb, 2008[17:10 UTC]  (358 reads)

MARIA MACIĄG*

Analiza termodynamiczna cech systemu tribologicznego na przykładzie wybranych badań eksperymentalnych, cz. II

Thermodynamic analysis of tribological system properties, part II

ZEM 4/2007


Read More (2325 bytes) Print
Badanie siły tarcia spoczynkowego w rozpylaczach wtryskiwaczy silników okręto
on: Thu 14 of Feb, 2008[17:09 UTC]  (342 reads)

JAN MONIETA*

Badanie siły tarcia spoczynkowego w rozpylaczach wtryskiwaczy silników okrętowych z unieruchomionymi iglicami

Injector nozzles, restrain of injector needles, friction force.

ZEM 4/2007


Read More (3615 bytes) Print
Wpływ konstrukcji czujnika cienkowarstwowego na dokładność pomiaru ciśnieni
on: Thu 14 of Feb, 2008[17:08 UTC]  (340 reads)

ADAM WILCZEK*

Wpływ konstrukcji czujnika cienkowarstwowego na dokładność pomiaru ciśnienia w styku EHD

The influence of thin layer transducer construction on the accuracy pressure measurement in an EHD contact

ZEM 4/2007


Read More (1931 bytes) Print
Zakłócenia piezoelektryczne w pomiarach ciśnienia czujnikami cienkowarstwowym
on: Thu 14 of Feb, 2008[17:07 UTC]  (372 reads)

ADAM WILCZEK*

Zakłócenia piezoelektryczne w pomiarach ciśnienia czujnikami cienkowarstwowymi w styku EHD

Piezoelectric disturbances of pressure measurements by means thin layer transducers in an EHD contact

ZEM 4/2007


Read More (803 bytes) Print
Ocena niezawodności złożonego obiektu technicznego z uwzględnieniem kosztów
on: Thu 14 of Feb, 2008[17:01 UTC]  (411 reads)

MAŁGORZATA HEINRICH*, GRAŻYNA JASICA*

Ocena niezawodności złożonego obiektu technicznego z uwzględnieniem kosztów eksploatacji na przykładzie maszyny dozująco-pakującej

Reliability estimation of selected, complex technical objects working in food industry including reneval costs

ZEM 4/2007


Read More (2646 bytes) Print
Metoda oceny ryzyka uszkodzeń katastroficznych poszycia statku powietrznego z k
on: Thu 14 of Feb, 2008[17:00 UTC]  (327 reads)

HENRYK SMOLIŃSKI*, MIECZYSŁAW STUKONIS*

Metoda oceny ryzyka uszkodzeń katastroficznych poszycia statku powietrznego z kompozytów warstwowych

Method of evaluating catastrophic damages risk of aircraft’s skin, made of stratified composite

ZEM 4/2007


Read More (2643 bytes) Print
Zarys modelu oceny niezawodności pracy działka lotniczego w aspekcie powstawan
on: Thu 14 of Feb, 2008[16:59 UTC]  (302 reads)

HENRYK TOMASZEK*, MARIUSZ WAŻNY**, MICHAŁ JASZTAL**

Zarys modelu oceny niezawodności pracy działka lotniczego w aspekcie powstawania uszkodzeń katastroficznych w postaci zacięć

Model of aircraft’s cannon working reliability in aspect of catastrophic damages in the form of jamming – an outline

ZEM 4/2007


Read More (2641 bytes) Print
Rozmyte rozszerzenie metody TKE określania jakości procesu użytkowania blokó
on: Thu 14 of Feb, 2008[16:58 UTC]  (315 reads)

MICHAŁ PAJĄK*

Rozmyte rozszerzenie metody TKE określania jakości procesu użytkowania bloków energetycznych

Fuzzy extension of the power units operation quality assessment according to the TKE method

ZEM 4/2007


Read More (2575 bytes) Print
Zagadnienia ustalania parametrów eksploatacyjnych wysokociśnieniowych zaworów
on: Thu 14 of Feb, 2008[16:56 UTC]  (339 reads)

ARTUR POPKO*

Zagadnienia ustalania parametrów eksploatacyjnych wysokociśnieniowych zaworów emulgujących

Problems of determine exploitation parameters of high pressure emulsifier valves

ZEM 4/2007


Read More (2295 bytes) Print
Geometria zazębienia przekładni ślimakowej ze stożkopochodnym ślimakiem ksz
on: Thu 14 of Feb, 2008[16:55 UTC]  (855 reads)

LESZEK SKOCZYLAS*

Geometria zazębienia przekładni ślimakowej ze stożkopochodnym ślimakiem kształtowanym narzędziem trzpieniowym

Mesh geometry of worm gear with K-type worm created by shank tool

ZEM 4/2007


Read More (2622 bytes) Print
Wpływ cech konstrukcyjnych hamulca tarczowego maszyny wyciągowej na jego niest
on: Thu 14 of Feb, 2008[16:54 UTC]  (415 reads)

STANISŁAW ŚCIESZKA*, MARCEL ŻOŁNIERZ*

Wpływ cech konstrukcyjnych hamulca tarczowego maszyny wyciągowej na jego niestabilność termosprężystą. Część II. Badania symulacyjne

ZEM 4/2007

Read More (1307 bytes) Print
System ekspertowy wykorzystujący trójwartościową informację diagnostyczną
on: Thu 14 of Feb, 2008[16:52 UTC]  (412 reads)

STANISŁAW DUER

System ekspertowy wykorzystujący trójwartościową informację diagnostyczną wspomagający obsługiwanie złożonego obiektu technicznego

Expert system for computer aided servicing of complex technical object with a use of three-value diagnostic information

ZEM 4/2007


Read More (1770 bytes) Print
Zastosowanie procedury decymacji liniowej w diagnostyce amortyzatorów samocho
on: Thu 14 of Feb, 2008[16:51 UTC]  (365 reads)

JANUSZ GARDULSKI

The application of a linear decimation procedure in the diagnostics of shock absorbers in passenger vehicles

Zastosowanie procedury decymacji liniowej w diagnostyce amortyzatorów samochodów osobowych

ZEM 4/2007


Read More (1566 bytes) Print
Metody identyfikacji modeli procesów wolnozmiennych na potrzeby diagnostyki tec
on: Thu 14 of Feb, 2008[16:46 UTC]  (360 reads)

PIOTR TOMASIK

Metody identyfikacji modeli procesów wolnozmiennych na potrzeby diagnostyki technicznej

Methods of modeling identification of slowly changing processes for needs of technical diagnosis

ZEM 4/2007
Read More (1714 bytes) Print



Created by: admin last modification: Thursday 22 of January, 2009[16:47:11 UTC] by admin

The original document is available at http://tiki.t.tribologia.eu/tiki-index.php?page=ZEM